Different Methods To Effectively Remove Tree Stumps
The most common method considered to remove a tree stump after cutting down a tree is to pull it out with a truck. The media have shown many people hitching stumps up to large vehicles and pulling; however, this is a very bad idea. Not only can it damage the truck, but it can also cause a great deal of damage to the ground surrounding the stump and any items lying in the path. So, how do you go about removing a stump effectively without causing damage? This article will provide information on different methods to effective removing these items.
1. Chemical Product Removal
Contrary to popular belief, the use of chemical products to remove a tree stump is an effective and safe technique. The products used are similar to chemical fertilizers found at home gardening centers and focus on speeding the decomposition of the wood as a means for this service. This is done via an increased amount of potassium nitrate enhancing the bacteria that contributes to natural decay. After decay begins, holes are drilled in the center of the stump, and a mixture of water and chemical is placed inside the stump. This mixture is left to work over a prolonged period until the wood is mulch. A pickaxe can then be used to break the stump and remove it safely.
2. Removing With Fire
Large tree stumps can be particularly difficult to remove, and one of the more common techniques is to burn them. This technique requires some preparation by drilling holes into the stump and filling these with kerosene – do not use gasoline! Allow the fuel to soak into the stump completely for a prolonged period dependent on the size of the stump. Once the entire stump is covered, drop a match into all holes and allow smoldering resulting in a charred ditch where a stump once existed. It is imperative that you check local fire codes before using this technique. Furthermore, children must be kept away from the stump when it is smoldering: http://wctreeservice.com/corona-ca/
3. Using A Tree Stump Grinder
A third option to removing a tree stump effectively and safely is with machinery, specifically the tree stump grinder. Temecula, CA is a mechanical tool used to remove stumps with a large circular cutting blade that grinds away wood using the toothed disc. Unlike the aforementioned techniques, this tool does not require several weeks of preparation to remove the stump and can be used immediately; however, there are precautions that must be taken before use.
As the grinder breaks wood into chips, it is important to remove debris and rocks from the stump to avoid damage to the machine. Despite the powerful effect of the grinder, it is recommended that a chain saw is used to trim the stump. This type of machinery is most effective when removing multiple tree stumps of a small to medium size.
4. Manual Tree Stump Removal
The most common removal technique for smaller tree stumps is manual removal. This is not necessarily time-consuming as manual tree stump removal does not require digging out the stump intact. Using tools, such as a pickaxe and spade, is necessary, but it is the manner in which you dig that will determine success. Always expose as many roots as possible and dig a trench far away from the stump to increase maneuverability.




